Shunt Diode Designs in Li/cf Shuttle Batteries

Although Li/CF cells and batteries have an excellent safety record, they are included with other battery systems that require additional safety precautions. One precaution suggested is the inclusion of shunt diodes into these batteries. The benefits of this addition are examined. All cells tested at elevated temperatures vent regardless of length of time between being fully discharged and reversed or inclusion of the diode in the system. Cells discharged at ambient temperatures all show a relatively quick reversal, but stabilize at voltages that are high enough that the diodes are not functioning. Cells tested at depressed temperatures reverse the deepest of all cells tested, with the deepest reversal occurring very early in the test and voltages recovering to above -0.60 volts near the end of the tests. Anode limited cells will eliminate the venting during hot reversal

Capital Ownership, Capital Structure and Capital Markets: Financial Constraints and the Decline of the Lancashire Cotton Textile Industry 1880-1965

The objective of this analysis is to provide a reinterpretation of the decline of the Lancashire cotton textile industry during the twentieth century. Its principal concerns are with the governance structure of the industry, the resultant capital structures of firms and the constraints thereby imposed on the activities of entrepreneurs. Its central thesis is that ownership of the industry, and the redistribution of ownership claims during booms and slumps, imposed pressures and constraints on decision-makers. These financial constraints dominated the strategic questions of re-equipment and modernisation

Forward error correction for molecular communications

Communication between nanoscale devices is an area of considerable importance as it is essential that future devices be able to form nanonetworks and realise their full potential. Molecular communication is a method based on diffusion, inspired by biological systems and useful over transmission distances in the nm to μm range. The propagation of messenger molecules via diffusion implies that there is thus a probability that they can either arrive outside of their required time slot or ultimately, not arrive at all. Therefore, in this paper, the use of a error correcting codes is considered as a method of enhancing the performance of future nanonetworks. Using a simple block code, it is shown that it is possible to deliver a coding gain of ∼1.7 dB at transmission distances of . Nevertheless, energy is required for the coding and decoding and as such this paper also considers the code in this context. It is shown that these simple error correction codes can deliver a benefit in terms of energy usage for transmission distances of upwards of for receivers of a radius

Keynes and the cotton industry: a reappraisal

The paper reinterprets Keynes’s analysis of the crisis in the Lancashire cotton industry in the 1920s. It presents empirical evidence showing that syndicates of local shareholders, but not the banks, were an important brake on firms exiting, at a time when exit barriers were otherwise unproblematic in this competitive industry. Moreover, syndicates milked firms of any profits through dividends, thereby limiting reinvestment and re-equipment possibilities. The case shows that where laissez-faire fails in response to a crisis, the associated response may need to assess both ownership structure and its relationship to competitive industry structure

Business strategy and firm performance: the British corporate economy, 1949-1984

There has been considerable and ongoing debate about the performance of the British economy since 1945. Empirical studies have concentrated on aggregate or industry level indicators. Few have examined individual firms’ financial performance. This study takes a sample of c.3000 firms in 19 industries and identifies Britain’s best performing companies over a period of 35 years. Successful companies are defined as a) those that survive as independent entities, b) that outperform peer group average return to capital for that industry, and c) that outperform other firms in the economy according to return on capital relative to industry average. Results are presented as league tables of success and some tentative explanations offered concerning the common strategies of successful firms. A broader research agenda for British business history is suggested

An evolutionary approach to the optimisation of autonomous pod distribution for application in an urban transportation service

For autonomous vehicles (AVs), which when deployed in urban areas are called “pods”, to be used as part of a commercially viable low-cost urban transport system, they will need to operate efficiently. Among ways to achieve efficiency, is to minimise time vehicles are not serving users. To reduce the amount of wasted time, this paper presents a novel approach for distribution of AVs within an urban environment. Our approach uses evolutionary computation, in the form of a genetic algorithm (GA), which is applied to a simulation of an intelligent transportation service, operating in the city of Coventry, UK. The goal of the GA is to optimise distribution of pods, to reduce the amount of user waiting time. To test the algorithm, real-world transport data was obtained for Coventry, which in turn was processed to generate user demand patterns. Results from the study showed a 30% increase in the number of successful journeys completed in a 24 hours, compared to a random distribution. The implications of these findings could yield significant benefits for fleet management companies. These include increases in profits per day, a decrease in capital cost, and better energy efficiency. The algorithm could also be adapted to any service offering pick up and drop of points, including package delivery and transportation of goods

Real-time state of charge estimation of electrochemical model for lithium-ion battery

This paper proposes the real-time Kalman filter based observer for Lithium-ion concentration estimation for the electrochemical battery model. Since the computation limitation of real-time battery management system (BMS) micro-processor, the battery model which is utilized in observer has been further simplified. In this paper, the Kalman filter based observer is applied on a reduced order model of single particle model to reduce computational burden for real-time applications. Both solid phase surface lithium concentration and battery state of charge (SoC) can be estimated with real-time capability. Software simulation results and the availability comparison of observers in different Hardware-in- the-loop simulation setups demonstrate the performance of the proposed method in state estimation and real-time application

An electrochemical study of the corrosion behavior of primer coated 2219-T87 aluminum

The corrosion behavior for 2219-T87 aluminum coated with various primers, including those used for the external tank and solid rocket boosters of the Space Shuttle Transportation System, were investigated using electrochemical techniques. Corrosion potential time, polarization resistance time, electrical resistance time, and corrosion rate time measurements were all investigated. It was found that electrical resistance time and corrosion rate time measurement were most useful for studying the corrosion behavior of painted aluminum. Electrical resistance time determination give useful information concerning the porosity of paint films, while corrosion rate time curves give important information concerning overall corrosion rates and corrosion mechanisms. In general, the corrosion rate time curves all exhibited at least one peak during the 30 day test period, which was attributed, according to the proposed mechanisms, to the onset of the hydrogen evolution reaction and the beginning of destruction of the protective properties of the paint film

Galvanic coupling between D6AC steel, 6061-T6 aluminum, Inconel 718 and graphite-epoxy composite material: Corrosion occurrence and prevention

The effects of galvanic coupling between D6AC steel, 6061-T6 aluminum, Inconel 718, and graphite-epoxy composite material (G/E) in 3.5% NaCl were studied. Measurements of corrosion potentials, galvanic currents and corrosion rates of the bare metals using weight-loss methods served to establish the need for corrosion protection in cases where D6AC steel and 6061-T6 aluminum are galvanically coupled to G/E in salt water while Inconel 718 was shown to be compatible with G/E. Six tests were made to study corrosion protective methods for eliminating galvanic corrosion in the cases of D6AC steel and 6061-T6 aluminum coupled to G/E. These results indicate that, when the G/E is completely coated with paint or a paint/polyurethane resin combination, satisfactory protection of the D6AC steel is achieved with either a coat of zinc-rich primer or a primer/topcoat combination. Likewise, satisfactory corrosion protection of the aluminum is achieved by coating it with an epoxy coating system

Non-contact temperature measurement requirements

The Marshall Space Flight Center is involved with levitation experiments for Spacelab, Space Station, and drop tube/tower operations. These experiments have temperature measurement requirements, that of course must be non-contact in nature. The experiment modules involved are the Acoustic Levitator Furnace (ALF), and the Modular Electromagnetic Levitator (MEL). User requirements of the ALF and drop tube are presented. The center also has temperature measurement needs that are not microgravity experiment oriented, but rather are related to the propulsion system for the STS. This requirement will also be discussed